Category Archives: rod-end-bearings

China high quality Spherical Plain Bearing Joint Bearing Knuckle Bearing Geew63es bearing air

Product Description

 

Basic Features of Spherical Plain Bearing
Types Radial Spherical Plain Bearings
Steel ball dimensions
Oil cylinder earrings Spherical Plain Bearings
Spherical Plain Bearings Rod End
L-Ball Joint Rod End
Angular Contact Spherical Plain Bearings
Thrust Spherical Plain Bearings
ШC∏ Series
Material Bearing Steel(GCr15, 100Cr6)
Carbon Steel
Stainless Steel
Bronze
Dimension Metric and Inch
Surface treatment Phosphated
Sliding surface treated with MoS2
Sliding surface treated with Chromium plating
Sliding surface of PTFE CZPT Material
Sliding surface of PTFE Fabric
Series and bore diameter range GE…E  4~12mm
GE…ES  15~200mm
GE…ES-2RS  15~200mm
GEG…E  4~12mm
GEG…ES  15~200mm
GEG…ES-2RS  15~200mm
SB…A  12~150mm
GEEW…ES  12~160mm
GEEM…ES-2RS  20~80mm
GEZ…ES  12.7~152.4mm
GEZ…ES-2RS  19.05~152.4mm
GEWZ…ES  12.7~88.9mm
GEWZ…ES-2RS  19.05~88.9mm
GEGZ…ES  31.75~139.7mm
GEGZ…ES-2RS  31.75~139.7mm
GEBK…S  5~30mm
GE……C  4~30mm
GEG…C  4~30mm
SGE..C  4~30mm
SGEG…C  4~30mm
COM  4.83~25.4mm
COM…T  4.83~25.4mm
GE…ET-2RS  15~120mm
GEG…ET-2RS  15~120mm
GEZ…ET-2RS  19.05~152.4mm
GK…DO 10-80mm
GF…DO  20~80mm
GIHR-K…DO  20~100mm
GIHN…K-LO  12-80mm
GAC…S  25~200mm
GX…S  10~200mm
MOQ 1 PC
Delivery Time 20-45 days
Sea Ports ZheJiang HangZhou HangZhou

Why Choose HECTO?
1. More than 20 years of manufacturing and exporting experiences
2. an IATF16949 company
3. 100% inspecting of products
4. More competitive prices with better quality
5. More than 99% of delivery in time
6. Rapid response of your emails and questions
7. Products can be traced back

 
 
 
 

Spherical Plain Bearings of GE…E, GE…ES, GE…ES-2RS series

Bearing No. Dimensions(mm) Load Ratings Weight
d D B C dk rs min r1s min α Dynamic Static
(KN) (KN) (Kg)
GE4E   4 12 5 3 8 0.3 0.3 16 2 10 0.003
GE5E   5 14 6 4 10 0.3 0.3 13 3.4 17 0.005
GE6E   6 14 6 4 10 0.3 0.3 13 3.4 17 0.004
GE8E   8 16 8 5 13 0.3 0.3 15 5.5 27 0.008
GE10E   10 19 9 6 16 0.3 0.3 12 8.1 40 0.011
GE12E   12 22 10 7 18 0.3 0.3 10 10 53 0.015
GE15ES GE15ES-2RS 15 26 12 9 22 0.3 0.3 8 16 84 0.571
GE17ES GE17ES-2RS 17 30 14 10 25 0.3 0.3 10 21 106 0.041
GE20ES GE20ES-2RS 20 35 16 12 29 0.3 0.3 9 30 146 0.066
GE25ES GE25ES-2RS 25 42 20 16 35.5 0.6 0.6 7 48 240 0.119
GE30ES GE30ES-2RS 30 47 22 18 40.7 0.6 0.6 6 62 310 0.153
GE35ES GE35ES-2RS 35 55 25 20 47 0.6 1 6 79 399 0.233
GE40ES GE40ES-2RS 40 62 28 22 53 0.6 1 7 99 495 0.306
GE45ES GE45ES-2RS 45 68 32 25 60 0.6 1 7 127 637 0.427
GE50ES GE50ES-2RS 50 75 35 28 66 0.6 1 6 156 780 0.546
GE60ES GE60ES-2RS 60 90 44 36 80 1 1 6 245 1220 1.04
GE70ES GE70ES-2RS 70 105 49 40 92 1 1 6 313 1560 1.55
GE80ES GE80ES-2RS 80 120 55 45 105 1 1 6 400 2000 2.31
GE90ES GE90ES-2RS 90 130 60 50 115 1 1 5 488 2440 2.75
GE100ES GE100ES-2RS 100 150 70 55 130 1 1 7 607 3030 4.45
GE110ES GE110ES-2RS 110 160 70 55 140 1 1 6 654 3270 4.82
GE120ES GE120ES-2RS 120 180 85 70 160 1 1 6 950 4750 8.05
GE140ES GE140ES-2RS 140 210 90 70 180 1 1 7 1070 5350 11.02
GE160ES GE160ES-2RS 160 230 105 80 200 1 1 8 1360 6800 14.01
GE180ES GE180ES-2RS 180 260 105 80 225 1.1 1.1 6 1530 7650 18.65
GE200ES GE200ES-2RS 200 290 130 100 250 1.1 1.1 7 2120 10600 28.03

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Rolling Element: Single Row
Structure: To The Heart
Material: Bearing Steel
Samples:
US$ 0/Set
1 Set(Min.Order)

|

Order Sample

quality bearing
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

rod end bearing

Impact of Temperature Variations and Environmental Conditions on Rod End Bearing Performance

Rod end bearings can be affected by temperature variations and environmental conditions, which may impact their performance. Here’s how these factors come into play:

1. Temperature Variations:

Temperature changes can influence the lubrication and material properties of rod end bearings. Extreme cold can cause lubricants to thicken, potentially leading to increased friction and reduced efficiency. On the other hand, high temperatures can cause lubricants to thin, which may result in inadequate lubrication and accelerated wear. Proper lubrication and material selection are crucial to ensure that rod end bearings operate optimally across a range of temperatures.

2. Contaminants and Moisture:

Industrial environments often expose rod end bearings to contaminants such as dust, dirt, and chemicals. Additionally, moisture and humidity can lead to corrosion and reduced bearing lifespan. Seals and boots can help protect rod end bearings from these elements, maintaining their performance and preventing premature failure. Regular maintenance, including cleaning and re-lubrication, is essential to counteract the effects of contaminants and moisture.

3. Corrosion Resistance:

Rod end bearings are available in various materials, including stainless steel, which offers excellent corrosion resistance. This is especially important in environments where exposure to moisture or chemical agents is common. Choosing the right material for the specific environmental conditions is crucial to prevent corrosion-related issues and ensure the long-term functionality of the bearings.

4. Material Expansion and Contraction:

Temperature variations can lead to the expansion and contraction of materials. This can affect the clearances within the bearing, potentially causing issues such as increased play or reduced load-carrying capacity. Proper bearing design and material selection, as well as regular inspections, can mitigate these effects.

5. Lubrication Intervals:

In extreme temperature or environmental conditions, more frequent lubrication may be necessary to maintain optimal performance and protect rod end bearings from premature wear. Lubricants should be chosen based on their suitability for the given operating conditions.

Overall, temperature variations and environmental conditions can impact rod end bearing performance. Proper maintenance, material selection, and environmental safeguards, such as seals and boots, are essential to ensure that rod end bearings continue to function reliably in diverse operating environments.

rod end bearing

Signs of Wear or Damage in Rod End Bearings and Replacement Guidelines

Rod end bearings are critical components in various mechanical systems, and it’s essential to monitor them for signs of wear or damage. Here are common indicators and guidelines for replacement:

1. Excessive Play or Looseness: If you notice excessive play or looseness in the rod end bearing, it’s a clear sign of wear. This can result in imprecise control and reduced system performance, so replacement is recommended.

2. Unusual Noises: Unusual noises such as knocking, clicking, or squeaking during movement are often indicative of rod end bearing issues. These noises can be a result of worn bearing surfaces or damaged components. Address the problem promptly to prevent further damage.

3. Corrosion or Rust: Exposure to moisture or harsh environmental conditions can lead to corrosion and rust on rod end bearings. Corroded bearings may not move smoothly, impacting system operation. If you observe significant corrosion, consider replacement.

4. Visible Damage: Any visible damage, such as cracks, dents, or deformation of the bearing’s body or components, should be taken seriously. Damaged rod end bearings can fail unexpectedly, leading to safety risks and system malfunctions. Replace them if damage is detected.

5. Reduced Range of Motion: If the rod end bearing restricts the range of motion or does not articulate smoothly, it may be worn or damaged. This can affect the performance of the associated system. Replacement is advisable to restore proper functionality.

6. Increased Friction: A sudden increase in friction during movement can indicate a lack of lubrication, contamination, or damage to the bearing surfaces. Re-greasing and cleaning may help, but if the issue persists, consider replacing the bearing.

7. Maintenance Intervals: Depending on the application, rod end bearings may have recommended maintenance intervals. Follow these guidelines and inspect the bearings during routine maintenance. If wear or damage is detected, replace them as necessary.

8. Safety Concerns: In safety-critical applications, it’s vital to prioritize bearing replacement at the first sign of wear or damage. Failure to do so can result in accidents or system failures with serious consequences.

Regular inspection and maintenance of rod end bearings are essential to ensure the continued reliability and performance of mechanical systems. When any of the above signs are observed, it’s advisable to replace the bearings promptly to prevent further issues and potential safety risks.

rod end bearing

Factors to Consider When Selecting a Rod End Bearing for a Specific Application

Choosing the right rod end bearing for a specific application is crucial to ensure optimal performance and longevity. Several factors should be taken into account during the selection process:

1. Load Capacity: Consider the magnitude and type of loads the bearing will need to support. Determine whether it will experience radial, axial, or a combination of loads. Select a rod end bearing with the appropriate load capacity rating to handle these loads.

2. Misalignment: Evaluate the degree of angular misalignment that may occur in the application. Some rod end bearings are designed to compensate for misalignment better than others. Choose a bearing that can accommodate the expected misalignment without compromising performance.

3. Environment: Take into account the operating environment. Consider factors like temperature, humidity, chemical exposure, and the presence of contaminants. Select a rod end bearing with suitable materials and protective features to withstand these conditions.

4. Lubrication: Proper lubrication is essential for the longevity and smooth operation of rod end bearings. Determine the lubrication method and frequency required for the application. Some rod end bearings come with built-in lubrication provisions or self-lubricating materials.

5. Thread Type and Size: The threaded shank of the rod end bearing should match the components it connects to. Consider the thread size and type (e.g., right-hand or left-hand threads) to ensure compatibility with your application.

6. Corrosion Resistance: If the application is in a corrosive environment, select a rod end bearing with corrosion-resistant materials or coatings. This is especially important in marine, chemical, or industrial settings.

7. Size and Weight Constraints: Ensure that the chosen rod end bearing fits within the space and weight limitations of the application. Measure the available space and consider weight restrictions when making your selection.

8. Operating Speed: Take into account the rotational or oscillatory speed of the bearing. Some rod end bearings are designed for high-speed applications, while others are better suited for low-speed or static applications.

9. Regulatory Compliance: In some industries, specific standards or regulations may apply to components like rod end bearings. Ensure that the selected bearing complies with any relevant industry standards or requirements.

10. Budget Constraints: While quality is essential, consider your budget constraints. Different rod end bearings come with varying price points. Choose a bearing that provides the necessary performance without exceeding your budget.

By carefully considering these factors, you can select the most suitable rod end bearing for your specific application, ensuring reliable and efficient operation.

China high quality Spherical Plain Bearing Joint Bearing Knuckle Bearing Geew63es   bearing airChina high quality Spherical Plain Bearing Joint Bearing Knuckle Bearing Geew63es   bearing air
editor by CX 2024-05-17

China wholesaler CF8 Female Thread Rod End Bearing For Medical Instruments bearing block

Product Description

CF8 Female Thread Rod End Bearing For Medical Instruments

                                                          Application

As a rule, rod ends are available with left or right-hand female or male threads. Rod ends have the sliding contact
surface combinations steel-on-steel, steel-on-bronze, steel-on-PTFE CZPT material, and steel-on-PTFE fabric.

Industrial Truck Parts Rod Ends Bearing

Product Name Rod Ends
Precision Rating P6, P0, P5, P4, P2
Material Bearing Steel  (GCr15)
Clearance C0 C1 C2 C3 C4 C5
Vibration & Noisy Z1,Z2,Z3 V1,V2,V3
Features High Precision, High Speed, Long Life, High Reliability, Low Noise , Reduce Friction
Certification ISO 9001:2008
Packing 1.Neutral Packing Bearing  2.Industrial Packing  3.Commercial Packing Bearing  4.Customize
Delivery Time 30 – 45 Days After The Order is Confirmed
Shippment 1.By Sea  2.By Air  3.By Express
Website http://hlimachinery

CF Series Requiring Maintenance Rod Ends Bearing Specification 

Model Dimensions (mm) Load Ratings Mass
d d3
2B
B C1 d2 d5 h1 L3
min
dK w α
KN kg
CF3* 4.826 10-32 7.92 5.94 15.88 10.31 26.97 12.7 11.1 7.92 10.0 9.247 0.018
CF4* 6.350 1/4-28 9.53 6.35 19.05 11.91 33.32 17.45 12.7 9.53 13.5 14.269 0.571
CF5* 7.938 5/16-24 11.1 7.92 22.23 12.7 34.93 17.45 15.88 11.1 11.0 17.009 0.036
CF6 9.525 3/8-24 12.7 9.12 25.4 17.45 41.28 20.62 18.26 14.27 11.0 22.627 0.059
CF7 11.113 7/16-20 14.27 10.31 28.58 19.05 46.02 23.8 20.62 15.88 10.5 28.4 0.082
CF8 12.700 1/2-20 15.88 11.5 33.32 22.23 53.98 26.97 23.8 19.05 10.0 40.459 0.132
CF10 15.875 5/8-18 19.05 12.29 38.1 25.4 63.5 34.93 28.58 22.23 13    

 

             
                                                                        About Us

HENGLI Machinery Company is a well-established Chinese bearing supplier. We design, manufacture and wholesale bearings.

Our specialized manufacturer of Spherical Roller Bearing Cylindrical Roller Bearing, XIHU (WEST LAKE) DIS. Rolling Bearing Co., Ltd

was established in 1970 and is accredited by the Chinese Ministry of Machine Building.

We invested in 2 additional specialized bearing factories, which allow us to provide our clients with top of the line products such

as Needle Roller Bearings, Spherical Plain Bearings, Rod Ends Bearings, Ball Joint Bearings, Tapered Roller Bearings,

Thrust Bearings, Cam Follower Bearings, Wheel Hub Bearings and Non-Standard Bearings.

FAQ
Q1 – What is our advantages?

     A    – Manufacturer – Do it only with the Best;

            -Your Choice make different. 

Q2 – Our Products

 A   – Spherical Roller Bearing, Cylindrical Roller Bearing, Needle Roller Bearing, Cam Followers, Thrust Bearing

      – Spherical Plain Bearing, Rod End, Ball Joint, Wheel Hub, Tapered Roller Bearing

Q3 – Process of our production

 A – Heat Treatment – Grinding – Parts Inspection – Assembly – Final Inspection – Packing

Q4 – How to customize bearing(non-standard) from your company?

 A -We offer OEM,Customized(Non-standard) service and you need to provide drawing and detailed Technical Data.

Q5 –   What should I care before installation?

 A   – Normally, the preservative with which new bearings are coated before leaving the factory does not need to be

        removed; it is only necessary to wipe off the outside cylin­drical surface and bore, if the grease is not compatible

        with the preservative, it is necessary to wash and carefully dry the bearing.

      -Bearings should be installed in a dry, dust-free room away from metal working or other machines producing

        swarf and dust.

Q6 – How to stock and maintenance my bearings right? 

 A   – Do not store bearings directly on concrete floors, where water can condense and collect on the bearing;

      -Store the bearings on a pallet or shelf, in an area where the bearings will not be subjected to high humidity

       or sudden and severe temperature changes that may result in condensation forming;

      -Always put oiled paper or, if not available, plastic sheets between rollers and cup races of tapered roller bearings.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Rolling Element: Single Row
Structure: Rod End
Material: Bearing Steel
Load Direction: Radial Spherical Plain Bearing
Add Lubricant: Non Self-lubricating
Outer Structure: Whole Outer Ring
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

rod end bearing

Contribution of Rod End Bearings to Complex Motion in Industrial Machinery

Rod end bearings play a significant role in ensuring the proper functioning of industrial machinery with complex motion. Here’s how they contribute:

1. Articulation and Pivoting:

Industrial machinery often requires components that can pivot and articulate in multiple directions. Rod end bearings provide a flexible connection point, allowing for a wide range of motion. They are commonly used in applications like robotic arms, conveyor systems, and material handling equipment, where precise movement and adaptability are essential.

2. Load Transmission:

Industrial machinery frequently deals with heavy loads and dynamic forces. Rod end bearings efficiently transmit these loads from moving components to stationary structures. Whether it’s the linear movement of a press or the tilting motion of a heavy-duty crane, rod end bearings enable the smooth transfer of forces, reducing wear and tear on the machinery.

3. Misalignment Compensation:

Machinery parts can become misaligned due to manufacturing tolerances, wear, or other factors. Rod end bearings excel at compensating for misalignments, ensuring that moving parts remain connected and operational. This capability is crucial in applications with variable alignment requirements, such as industrial automation systems and assembly line equipment.

4. Precision and Control:

Many industrial processes demand precision and control over motion. Rod end bearings help achieve this by providing a reliable connection point that can be adjusted and fine-tuned. This precision is essential in applications like CNC machinery, where the accuracy of tool movement directly impacts the quality of the final product.

5. Corrosion Resistance:

Industrial machinery operates in diverse environments, some of which may expose components to moisture and corrosive substances. Rod end bearings are available in various materials, including stainless steel, which offers excellent corrosion resistance. This ensures the bearings’ longevity and reliability, even in challenging conditions.

Overall, rod end bearings contribute to the efficient and reliable operation of industrial machinery with complex motion requirements. Their ability to accommodate articulation, handle heavy loads, compensate for misalignment, provide precision, and resist corrosion makes them invaluable components in various industrial applications.

rod end bearing

Impact of Different Materials on Rod End Bearing Performance

Rod end bearings can be manufactured from various materials, and the choice of material significantly affects their performance. Two common materials used are stainless steel and carbon steel:

Stainless Steel Rod End Bearings:

1. Corrosion Resistance: Stainless steel rod end bearings offer excellent resistance to corrosion, making them suitable for applications in wet or corrosive environments, including marine and outdoor settings.

2. Hygienic Applications: They are ideal for applications in food processing, pharmaceuticals, and medical equipment due to their non-reactive and hygienic properties.

3. Temperature Resistance: Stainless steel can withstand a wide range of temperatures, making these bearings suitable for applications exposed to extreme heat or cold.

Carbon Steel Rod End Bearings:

1. Strength and Durability: Carbon steel rod end bearings are known for their high strength and durability, making them suitable for heavy-duty industrial applications such as construction equipment and agricultural machinery.

2. Cost-Effectiveness: They are often more cost-effective than stainless steel bearings, which makes them a preferred choice when the enhanced corrosion resistance of stainless steel is not required.

3. Machinability: Carbon steel is easier to machine and modify, making it a good choice for customized or specialized bearing configurations.

Ultimately, the choice between stainless steel and carbon steel rod end bearings depends on the specific application’s environmental conditions, load requirements, and cost considerations. Stainless steel is preferred for its corrosion resistance, while carbon steel excels in applications demanding strength and durability.

rod end bearing

Factors to Consider When Selecting a Rod End Bearing for a Specific Application

Choosing the right rod end bearing for a specific application is crucial to ensure optimal performance and longevity. Several factors should be taken into account during the selection process:

1. Load Capacity: Consider the magnitude and type of loads the bearing will need to support. Determine whether it will experience radial, axial, or a combination of loads. Select a rod end bearing with the appropriate load capacity rating to handle these loads.

2. Misalignment: Evaluate the degree of angular misalignment that may occur in the application. Some rod end bearings are designed to compensate for misalignment better than others. Choose a bearing that can accommodate the expected misalignment without compromising performance.

3. Environment: Take into account the operating environment. Consider factors like temperature, humidity, chemical exposure, and the presence of contaminants. Select a rod end bearing with suitable materials and protective features to withstand these conditions.

4. Lubrication: Proper lubrication is essential for the longevity and smooth operation of rod end bearings. Determine the lubrication method and frequency required for the application. Some rod end bearings come with built-in lubrication provisions or self-lubricating materials.

5. Thread Type and Size: The threaded shank of the rod end bearing should match the components it connects to. Consider the thread size and type (e.g., right-hand or left-hand threads) to ensure compatibility with your application.

6. Corrosion Resistance: If the application is in a corrosive environment, select a rod end bearing with corrosion-resistant materials or coatings. This is especially important in marine, chemical, or industrial settings.

7. Size and Weight Constraints: Ensure that the chosen rod end bearing fits within the space and weight limitations of the application. Measure the available space and consider weight restrictions when making your selection.

8. Operating Speed: Take into account the rotational or oscillatory speed of the bearing. Some rod end bearings are designed for high-speed applications, while others are better suited for low-speed or static applications.

9. Regulatory Compliance: In some industries, specific standards or regulations may apply to components like rod end bearings. Ensure that the selected bearing complies with any relevant industry standards or requirements.

10. Budget Constraints: While quality is essential, consider your budget constraints. Different rod end bearings come with varying price points. Choose a bearing that provides the necessary performance without exceeding your budget.

By carefully considering these factors, you can select the most suitable rod end bearing for your specific application, ensuring reliable and efficient operation.

China wholesaler CF8 Female Thread Rod End Bearing For Medical Instruments   bearing blockChina wholesaler CF8 Female Thread Rod End Bearing For Medical Instruments   bearing block
editor by CX 2024-05-16

China Hot selling Top Quality Factory Price Articulated Bearing wheel bearing

Product Description

GEZ076ES-2RS GEZ080ES-2RS GEZ096ES-2RS GEZ012ET-2RS GEZ014ET-2RS GEZ016ET-2RS GEZ571ET-2RS GEZ571ET-2RS GEZ571ET-2RS GEZ571ET-2RS GEZ032ET-2RS GEZ036ET-2RS GEZ040ET-2RS GEZ044ET-2RS GEZ048ET-2RS GEZ048ET-2RS GEZ056ET-2RS GEZ060ET-2RS GEZ064ET-2RS GEZ068ET-2RS GEZ072ET-2RS GEZ076ET-2RS GEZ080ET-2RS GEZ096ET-2RS GEGZ571ES GEGZ571ES GEGZ571ES GEGZ032ES GEGZ036ES GEGZ040ES GEGZ044ES GEGZ048ES GEGZ052ES GEGZ056ES GEGZ060ES GEGZ064ES GEGZ072ES GEGZ088ES GEGZ571ES-2RS GEGZ571ES-2RS GEGZ571ES-2RS GEGZ032ES-2RS GEGZ036ES-2RS GEGZ040ES-2RS GEGZ044ES-2RS GEGZ048ES-2RS GEGZ052ES-2RS GEGZ056ES-2RS GEGZ060ES-2RS GEGZ064ES-2RS GEGZ072ES-2RS GEGZ088ES-2RS GEWZ008ES GEWZ571ES GEWZ012ES GEWZ014ES GEWZ016ES GEWZ571ES GEWZ571ES GEWZ571ES GEWZ571ES GEWZ032ES GEWZ036ES GEWZ040ES GEWZ044ES GEWZ048ES GEWZ052ES GEWZ056ES GEWZ060ES GEWZ064ES GEWZ072ES GEWZ080ES GEWZ096ES GEWZ008ES-2RS GEWZ571ES-2RS GEWZ012ES-2RS GEWZ014ES-2RS GEWZ016ES-2RS GEWZ571ES-2RS GEWZ571ES-2RS GEWZ571ES-2RS GEWZ571ES-2RS GEWZ032ES-2RS GEWZ036ES-2RS GEWZ040ES-2RS GEWZ044ES-2RS GEWZ048ES-2RS GEWZ052ES-2RS GEWZ056ES-2RS GEWZ060ES-2RS GEWZ064ES-2RS GEWZ072ES-2RS GEWZ080ES-2RS GEWZ096ES-2RS GACZ008S GACZ571S GACZ012S GACZ014S GACZ016S GACZ571S GACZ571S GACZ571S GACZ571S GACZ032S GACZ036S GACZ040S GACZ044S GACZ048S GACZ052S GACZ056S GACZ060S GACZ064S GACZ072S GACZ080S GACZ096S GE15ET-2RS GE17ET-2RS GE20ET-2RS GE25ET-2RS GE30ET-2RS GE35ET-2RS GE45ET-2RS GE50ET-2RS GE60ET-2RS GE70ET-2RS GE80ET-2RS GE90ET-2RS GE100ET-2RS GE110ET-2RS GE140XT-2RS GE160XT-2RS MS14101-3 MS14101-4 MS14101-5 MS14101-5A MS14101-6 MS14101-7 MS14101-8 MS14101-9 MS14101-10 MS14101-12 MS14101-14 MS14101-16 MS14104-3 MS14104-4 MS14104-5 MS14104-6 MS14104-7 MS14104-8 MS14104-9 MS14104-10 MS14104-12 MS14104-14 MS14104-16 ANC-3TG ANC-4TG ANC-5TG ANC-5TGA ANC-6TG ANC-7TG ANC-8TG ANC-9TG ANC-10TG ANC-12TG ANC-14TG ANC-16TG ANC-3T ANC-4T ANC-5T ANC-6T ANC-7T ANC-8T ANC-9T ANC-10T ANC-12T ANC-14T ANC-16T MS14101-3 MS14101-4 MS14101-5 MS14101-5A MS14101-6 MS14101-7 MS14101-8 MS14101-9 MS14101-10 MS14101-12 MS14101-14 MS14101-16 MS14104-3 MS14104-4 MS14104-5 MS14104-6 MS14104-7 MS14104-8 MS14104-9 MS14104-10 MS14104-12 MS14104-14 MS14104-16 ANC-3TG ANC-4TG ANC-5TG ANC-5TGA ANC-6TG ANC-7TG ANC-8TG ANC-9TG ANC-10TG ANC-12TG ANC-14TG ANC-16TG ANC-3T ANC-4T ANC-5T ANC-6T ANC-7T ANC-8T ANC-9T ANC-10T ANC-12T ANC-14T ANC-16T MS14103-3 MS14103-4 MS14103-5 MS14103-6 MS14103-7 MS14103-7A MS14103-8 MS14103-9 MS14103-10 MS14103-12 MS14103-14 MS14103-16 MS14102-3 MS14102-4 MS14102-5 MS14102-6 MS14102-7 MS14102-8 MS14102-9 MS14102-10 MS14102-12 MS14102-14 MS14102-16 AWC-3TG AWC-4TG AWC-5TG AWC-6TG AWC-7TG AWC-7TGA AWC-8TG AWC-9TG AWC-10TG AWC-12TG AWC-14TG AWC-16TG AWC-3T AWC-4T AWC-5T AWC-6T AWC-7T AWC-8T AWC-9T AWC-10T AWC-12T AWC-14T AWC-16T MS14103-3 MS14103-4 MS14103-5 MS14103-6 MS14103-7 MS14103-7A MS14103-8 MS14103-9 MS14103-10 MS14103-12 MS14103-14 MS14103-16 MS14102-3 MS14102-4 MS14102-5 MS14102-6 MS14102-7 MS14102-8 MS14102-9 MS14102-10 MS14102-12 MS14102-14 MS14102-16 AWC-3TG AWC-4TG AWC-5TG AWC-6TG AWC-7TGA AWC-8TG AWC-9TG AWC-10TG AWC-12TG AWC-14TG AWC-16TG AWC-3T AWC-3T AWC-4T AWC-5T AWC-6T AWC-7T AWC-8T AWC-9T AWC-10T AWC-12T AWC-14T AWC-16T

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Rolling Element: Single Row
Structure: Rod End
Material: Stainless Steel
Load Direction: Radial Spherical Plain Bearing
Add Lubricant: Self-lubricating
Outer Structure: Outer Ring of Single-Slit
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

rod end bearing

Improving Aircraft Functionality with Rod End Bearings

Rod end bearings play a critical role in enhancing the functionality and safety of various aircraft components, including control surfaces and landing gear. Here’s how:

Aircraft Control Surfaces:

Rod end bearings are commonly used in aircraft control systems to connect control surfaces, such as ailerons, elevators, and rudders, to control cables or rods. These bearings provide several key benefits:

  • Articulation: Rod end bearings offer articulation capabilities, allowing control surfaces to move smoothly and precisely. This flexibility is essential for pilots to control the aircraft’s attitude, roll, pitch, and yaw.
  • Misalignment Compensation: Aircraft structures experience various forces and vibrations during flight. Rod end bearings accommodate misalignment, ensuring that control systems remain effective even under dynamic conditions.
  • Durability: Aircraft operate in challenging environments, and rod end bearings are designed to withstand extreme temperatures, vibrations, and mechanical stress. Their robust construction contributes to the longevity and reliability of control systems.
  • Weight Savings: Aircraft design prioritizes weight reduction. Rod end bearings, typically made from lightweight materials like high-strength alloys or composites, help minimize the overall weight of the aircraft.

Landing Gear:

Rod end bearings are also utilized in landing gear systems, which are critical for safe takeoffs, landings, and ground operations. Their contributions include:

  • Shock Absorption: Landing gear components, including rod end bearings, play a role in shock absorption during landing, reducing the impact forces transmitted to the aircraft’s structure and passengers.
  • Articulation for Retraction and Extension: Rod end bearings enable the controlled movement of landing gear components, allowing for smooth retraction and extension. This is crucial for aerodynamic efficiency and safety.
  • Structural Integrity: Rod end bearings help maintain the structural integrity of the landing gear assembly, ensuring that it can support the aircraft’s weight during ground operations.

Overall, rod end bearings in aircraft applications contribute to the precise control, safety, and structural reliability necessary for aviation. Their ability to handle articulation, misalignment, and challenging operating conditions makes them indispensable components in the aerospace industry.

rod end bearing

Challenges and Solutions in Managing Load and Misalignment in Rod End Bearings

Rod end bearings often face challenges related to load capacity and misalignment in various applications. Here are the common challenges and solutions:

1. Radial and Axial Loads:

Challenge: Rod end bearings need to handle both radial and axial loads simultaneously in many applications.

Solution: Select rod end bearings with appropriate load ratings and materials to ensure they can withstand the expected loads. Also, proper maintenance and lubrication are essential for maximizing load-carrying capacity.

2. Misalignment:

Challenge: Misalignment can cause premature wear and reduced bearing lifespan.

Solution: Use self-aligning rod end bearings or incorporate spherical plain bearings to compensate for misalignment. Regular inspection and maintenance to correct any alignment issues are crucial.

3. Corrosion and Contaminants:

Challenge: Exposure to moisture, chemicals, and contaminants can lead to corrosion and damage.

Solution: Choose rod end bearings with suitable protective coatings or seals, such as PTFE liners or rubber boots, to prevent contaminants from entering. Stainless steel bearings offer enhanced corrosion resistance.

4. Lubrication:

Challenge: Inadequate lubrication can result in increased friction, overheating, and premature failure.

Solution: Follow the manufacturer’s lubrication recommendations and maintenance schedules. Proper lubrication ensures smooth operation and extends bearing life.

5. Shock and Impact Loads:

Challenge: Applications with frequent shock and impact loads can subject rod end bearings to excessive stress.

Solution: Choose rod end bearings with robust construction and materials to withstand shock loads. Regular inspections are necessary to detect early signs of damage.

By addressing these challenges with appropriate solutions, rod end bearings can perform optimally and provide long-lasting service in a wide range of applications.

rod end bearing

Impact of Proper Lubrication on Rod End Bearings

Proper lubrication is crucial for enhancing the performance and extending the longevity of rod end bearings. Here’s how it impacts these aspects:

1. Reduced Friction: Lubrication creates a film between moving parts, reducing friction. This minimizes wear and heat generation, leading to smoother and more efficient operation of the rod end bearing.

2. Wear Prevention: Lubrication helps prevent wear and surface damage on bearing components, particularly the ball and raceway. This is vital for the long-term durability of the bearing.

3. Corrosion Resistance: In applications exposed to moisture or corrosive substances, lubrication provides a protective barrier, preventing rust and corrosion on the bearing’s surfaces. This is especially important in outdoor or marine environments.

4. Noise Reduction: Adequate lubrication reduces noise and vibration in the bearing. This is important for applications where noise levels must be minimized, such as in the aerospace or medical industries.

5. Temperature Control: Lubrication helps dissipate heat generated by friction. Effective temperature control prevents overheating, which can lead to premature bearing failure.

6. Seal and Shield Function: Lubrication also works in conjunction with bearing seals and shields to keep contaminants out. It maintains a clean and contaminant-free internal environment, further increasing the bearing’s longevity.

7. Longevity: Proper lubrication significantly extends the service life of rod end bearings. Regular maintenance and relubrication schedules are essential for maximizing the bearing’s operational lifespan.

8. Efficiency: Lubrication contributes to the overall efficiency of the bearing, ensuring that it operates at peak performance levels, even under heavy loads or misalignment conditions.

9. Performance Consistency: Adequate lubrication helps maintain consistent performance over time. This is especially important in critical applications where performance fluctuations could lead to safety or quality concerns.

It’s important to use the lubricant recommended by the bearing manufacturer and follow their guidelines for lubrication intervals. Over-lubrication can be as detrimental as under-lubrication, so maintaining the right balance is essential.

Regular inspections and maintenance routines should be established to monitor the lubrication condition and reapply lubricant as needed. This proactive approach ensures that rod end bearings operate effectively, offering reliability and a longer service life.

China Hot selling Top Quality Factory Price Articulated Bearing   wheel bearingChina Hot selling Top Quality Factory Price Articulated Bearing   wheel bearing
editor by CX 2024-05-16

China Professional Chromoly Male Series Rose Heim Joint Rod Ends Bearing Ball Joints Galvanized Left and Right Positive Reverse Inside Thread Phs8 bearing bronze

Product Description

Product Description

SI6T/K M6 Female Thread Rod End Joint Bearing Spherical Oscillating Bearing

Product Name Male thread rose joint rod end bearing (POS series 5-30mm)
Model No. POS5, POS6, POS8, POS10, POS12, POS14, POS16, POS18, POS20, POS22, POS25, POS28, POS30.
Material Outer Shell: Carbon Steel; Inner Ball: Bearing Steel
Thread Type Male thread;  Left-hand / right-hand thread.
Surface Treatment Forging/ Machining;  Zinc, brass, chrome, nickel plating.
Other Model No.

PHS5, PHS6, PHS8, PHS10, PHS12, PHS14, PHS16, PHS18, PHS20, PHS22, PHS25, PHS28, PHS30.

POS5, POS6, POS8, POS10, POS12, POS14, POS16, POS18, POS20, POS22, POS25, POS28, POS30.

SI5T/K, SI6T/K, SI8T/K, SI10T/K, SI12T/K, SI14T/K, SI16T/K, SI18T/K, SI20T/K, SI22T/K, SI25T/K, SI28T/K, SI30T/K.

SA5T/K, SA6T/K, SA8T/K, SA10T/K, SA12T/K, SA14T/K, SA16T/K, SA18T/K, SA20T/K, SA22T/K, SA25T/K, SA28T/K, SA30T/K.

SI5E, SI6E, SI8E, SI10E, SI12E, SI15ES, SI17ES, SI20ES, SI25ES, SI30ES, SI35ES, SI40ES, SI45ES, SI50ES, SI60ES, SI70ES, SI80ES.

SA5E, SA6E, SA8E, SA10E, SA12E, SA15ES, SA17ES, SA20ES, SA25ES, SA30ES, SA35ES, SA40ES, SA45ES, SA50ES, SA60ES, SA70ES, SA80ES.

Other Material Outer Shell: Carbon Steel; Inner Ball: Carbon Steel
Application Rod end bearing is widely used for engineering hydraulic oil cylinder, Forging machine tools, engineering machinery, automation equipment, car shock absorber, hydraulic machinery and other industries. Self lubricating joints and auxiliary promise used in water conservancy, professional machinery and other industries.

Product Parameters

Detailed Photos

 

Company Profile

 

 

Our Advantages

FAQ

DO NOT worry about PRICE, we are manufacturer.

 

DO NOT worry about QUALITY, we have 16 years experience.

 

DO NOT worry about AFTER-SALES, we are 24 hours online.

Q1:Who we are?

We are the factory based in ZHangZhoug,China,start from 2007 sell to all over the.world.the factory area is around 45000 square meters.we have 900 employees.

 

Q2: Do you have a catalogue?

Can you send me the catalogue to have a check of all your products?

A: Yes , We have product catalogue.Please contact us on line or send an Email to sending the catalogue.

Q3: I can’t find the product on your catalogue, can you make this product for me?
A: Our catalogue shows most of our products,but not all.So just let us know what product do you need.

Q4 : Can you make customized products and customized packing?
A: Yes.We made a lot of customized products for our customer before.And we have many moulds for our customers already.About customized packing,we can put your Logo or other info on the packing.There is no problem.

Q5: Can you provide samples ? Are the samples free ?
A: Yes,we can provide samples.Normally,we provide 1-2pcs free samples for test or quality checking.But you have to pay for the
shipping cos.If you need many items, or need more qty for each item,we will charge for the samples.

Any requirements or question,Welcome to “Send” us an e-mail Now!
 

Recommend product

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Rolling Element: Single Row
Structure: Rod End
Material: Bearing Steel
Load Direction: Thrust Spherical Plain Bearing
Add Lubricant: Non Self-lubricating
Rod End: Rod End
Samples:
US$ 2.5/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

rod end bearing

Impact of Temperature Variations and Environmental Conditions on Rod End Bearing Performance

Rod end bearings can be affected by temperature variations and environmental conditions, which may impact their performance. Here’s how these factors come into play:

1. Temperature Variations:

Temperature changes can influence the lubrication and material properties of rod end bearings. Extreme cold can cause lubricants to thicken, potentially leading to increased friction and reduced efficiency. On the other hand, high temperatures can cause lubricants to thin, which may result in inadequate lubrication and accelerated wear. Proper lubrication and material selection are crucial to ensure that rod end bearings operate optimally across a range of temperatures.

2. Contaminants and Moisture:

Industrial environments often expose rod end bearings to contaminants such as dust, dirt, and chemicals. Additionally, moisture and humidity can lead to corrosion and reduced bearing lifespan. Seals and boots can help protect rod end bearings from these elements, maintaining their performance and preventing premature failure. Regular maintenance, including cleaning and re-lubrication, is essential to counteract the effects of contaminants and moisture.

3. Corrosion Resistance:

Rod end bearings are available in various materials, including stainless steel, which offers excellent corrosion resistance. This is especially important in environments where exposure to moisture or chemical agents is common. Choosing the right material for the specific environmental conditions is crucial to prevent corrosion-related issues and ensure the long-term functionality of the bearings.

4. Material Expansion and Contraction:

Temperature variations can lead to the expansion and contraction of materials. This can affect the clearances within the bearing, potentially causing issues such as increased play or reduced load-carrying capacity. Proper bearing design and material selection, as well as regular inspections, can mitigate these effects.

5. Lubrication Intervals:

In extreme temperature or environmental conditions, more frequent lubrication may be necessary to maintain optimal performance and protect rod end bearings from premature wear. Lubricants should be chosen based on their suitability for the given operating conditions.

Overall, temperature variations and environmental conditions can impact rod end bearing performance. Proper maintenance, material selection, and environmental safeguards, such as seals and boots, are essential to ensure that rod end bearings continue to function reliably in diverse operating environments.

rod end bearing

Signs of Wear or Damage in Rod End Bearings and Replacement Guidelines

Rod end bearings are critical components in various mechanical systems, and it’s essential to monitor them for signs of wear or damage. Here are common indicators and guidelines for replacement:

1. Excessive Play or Looseness: If you notice excessive play or looseness in the rod end bearing, it’s a clear sign of wear. This can result in imprecise control and reduced system performance, so replacement is recommended.

2. Unusual Noises: Unusual noises such as knocking, clicking, or squeaking during movement are often indicative of rod end bearing issues. These noises can be a result of worn bearing surfaces or damaged components. Address the problem promptly to prevent further damage.

3. Corrosion or Rust: Exposure to moisture or harsh environmental conditions can lead to corrosion and rust on rod end bearings. Corroded bearings may not move smoothly, impacting system operation. If you observe significant corrosion, consider replacement.

4. Visible Damage: Any visible damage, such as cracks, dents, or deformation of the bearing’s body or components, should be taken seriously. Damaged rod end bearings can fail unexpectedly, leading to safety risks and system malfunctions. Replace them if damage is detected.

5. Reduced Range of Motion: If the rod end bearing restricts the range of motion or does not articulate smoothly, it may be worn or damaged. This can affect the performance of the associated system. Replacement is advisable to restore proper functionality.

6. Increased Friction: A sudden increase in friction during movement can indicate a lack of lubrication, contamination, or damage to the bearing surfaces. Re-greasing and cleaning may help, but if the issue persists, consider replacing the bearing.

7. Maintenance Intervals: Depending on the application, rod end bearings may have recommended maintenance intervals. Follow these guidelines and inspect the bearings during routine maintenance. If wear or damage is detected, replace them as necessary.

8. Safety Concerns: In safety-critical applications, it’s vital to prioritize bearing replacement at the first sign of wear or damage. Failure to do so can result in accidents or system failures with serious consequences.

Regular inspection and maintenance of rod end bearings are essential to ensure the continued reliability and performance of mechanical systems. When any of the above signs are observed, it’s advisable to replace the bearings promptly to prevent further issues and potential safety risks.

rod end bearing

Applications and Industries Using Rod End Bearings

Rod end bearings find application across various industries and serve multiple purposes due to their versatility and design. Common applications and sectors where rod end bearings are used include:

1. Automotive: Rod end bearings are utilized in vehicle suspension systems, steering linkages, and throttle linkages, contributing to precise control and smooth movement.

2. Aerospace: They play a crucial role in aircraft control systems, ensuring reliable and precise movement in critical flight control components.

3. Construction and Heavy Machinery: These bearings are used in heavy equipment like cranes, excavators, and loaders for precise positioning and movement in various parts of the machinery.

4. Manufacturing: In manufacturing machinery, rod end bearings are employed for automation and motion control applications, ensuring accurate and smooth movement in industrial processes.

5. Agricultural Equipment: Farm machinery, such as tractors and combines, use rod end bearings in steering systems, hydraulics, and other mechanical components.

6. Robotics: Rod end bearings are critical in robotic arms and automation systems, facilitating precise movement and control in manufacturing, medical, and other industries.

7. Marine and Offshore: They are used in marine applications, contributing to reliable control and movement in boat steering systems and offshore equipment.

8. Medical Equipment: In medical devices and equipment, rod end bearings ensure precise and smooth movement, making them essential in applications like surgical robots and diagnostic instruments.

9. Racing and Motorsports: Rod end bearings are used in high-performance vehicles for suspension and steering systems, where precise control is paramount.

10. Material Handling: Conveyor systems and material handling equipment benefit from rod end bearings, ensuring efficient movement and transport of goods.

11. Renewable Energy: They play a role in solar tracking systems and wind turbine applications, helping to adjust panel angles and rotor blades for optimal energy capture.

12. Rail and Transportation: In rail systems and transportation equipment, rod end bearings are employed in various components, including doors, brakes, and suspension systems.

13. Sports and Fitness Equipment: In gym equipment and sports machinery, they provide smooth and reliable motion in treadmills, exercise bikes, and more.

Rod end bearings are valued for their ability to provide reliable and precise movement in a wide range of applications, contributing to the efficiency and safety of various industries.

China Professional Chromoly Male Series Rose Heim Joint Rod Ends Bearing Ball Joints Galvanized Left and Right Positive Reverse Inside Thread Phs8   bearing bronzeChina Professional Chromoly Male Series Rose Heim Joint Rod Ends Bearing Ball Joints Galvanized Left and Right Positive Reverse Inside Thread Phs8   bearing bronze
editor by CX 2024-05-15

China wholesaler Precision Bearing of Radial Spherical Plain Bearings (GEG20ES) supplier

Product Description

GEG–E, GEG–ES 
Out ring of carbon chromium steel, fractured, hardened and phosphated, sliding surface treated with MOS2. It has characteristies of wear-resistance, wear-corrosion and self-aligning, suitable for heavy radial loads and any direction lower axial loads mechanim. 
With wider inner ring and larger outside diameter, for bearing arrangement where a lrge angle of tilt is needed, suitable for larger loads mechanism. 

GEG–ES-2RS:  
With 2 seals at both sides, for bearing arrangement where separate seals do not provide adequate protection. 
With wider inner ring and larger outside diameter, for bearing arrangement where a lrge angle of tilt is needed, suitable for larger loads mechanism. 

 
We, 
Guarantee the Quality standard ASSURED. in contract. 

Guarantee the Delivery time as ASSURED (MAX. 40D)

Guarantee the Material as ASSURED

Guarantee the Package As ASSURED  
 
 Our Advantages
1, Experience: 20 years experience on bearing manufacturing and exporting. 
2, Customer: Exporting to more than 126 countries on 6 continents
3, Quality standard: ONLY Above than P6
4, Delivery Within: 10-40 days after T/T or L/C, pay penalty for any delay.  
 

LZWB SKF ELGES LS SKF ELGE S
GEG6E GEH6E GE6FO GEG 6E GEH 6E GE 6 FO
GEG8E GEH8E GE8FO GEG 8 E GEH 8 E GE 8 FO
GEG10E GEH10E GE10FO GEG 10 E GEH 10 E GE 10 FO
GEG12E GEH12E GE12FO GEG 12 E GEH 12 E GE 12 FO
GEG15ES GEH15ES GE15FO GEG 15 ES GEH 15 ES GE 15 FO
GEG17ES GEH17ES GE17FO GEG 17 ES GEH 17 ES GE 17 FO
GEG20ES GEH20ES GE20FO GEG 20 ES GEH 20 ES GE 20 FO
GEG25ES GEH25ES GE25FO GEG 25 ES GEH 25 ES GE 25 FO
GEG30ES GEH30ES GE30FO GEG 30 ES GEH 30 ES GE 30 FO
GEG35ES GEH35ES GE35FO GEG 35 ES GEH 35 ES GE 35 FO
GEG40ES GEH40ES GE40FO GEG 40 ES GEH 40 ES GE 40 FO
GEG45ES GEH45ES GE45FO GEG 45 ES GEH 45 ES GE 45 FO
GEG50ES GEH50ES GE50FO GEG 50 ES GEH 50 ES GE 50 FO
GEG60ES GEH60ES GE60FO GEG 60 ES GEH 60 ES GE 60 FO
GEG70ES GEH70ES GE70FO GEG 70 ES GEH 70 ES GE 70 FO
GEG80ES GEH80ES GE80FO GEG 80 ES GEH 80 ES GE 80 FO
GEG90ES GEH90ES GE90FO GEG 90 ES GEH 90 ES GE 90 FO
GEG100ES GEH100ES GE100FO GEG 100 ES GEH 100 ES GE 100 FO
GEG110ES GEH110ES GE110FO GEG 110 ES GEH 110 ES GE 110 FO
GEG120ES GEH120ES GE120FO GEG 120 ES GEH 120 ES GE 120 FO
GEG140ES GEH140ES GE140FO GEG 140 ES GEH 140 ES GE 140 FO
GEG160ES GEH160ES GE160FO GEG 160 ES GEH 160 ES GE 160 FO
GEG180ES GEH180ES GE180FO GEG 180 ES GEH 180 ES GE 180 FO
GEG200ES GEH200ES GE200FO GEG 200 ES GEH 200 ES GE 200 FO
GEG220ES GEH220ES GE220FO GEG 220 ES GEH 220 ES GE 220 FO
GEG240ES GEH240ES GE240FO GEG 240 ES GEH 240 ES GE 240 FO
GEG260ES GEH260ES GE260FO GEG 260 ES GEH 260 ES GE 260 FO
GEG280ES GEH280ES GE280FO GEG 280 ES GEH 280 ES GE 280 FO
GEG15ES-2RS GEH15ES-2RS GE15FO-2RS GEG 15 ES-2RS GEH 15 ES-2RS GE 15 FO-2RS
GEG17ES-2RS GEH17ES-2RS GE17FO-2RS GEG 17 ES-2RS GEH 17 ES-2RS GE 17 FO-2RS
GEG20ES-2RS GEH20ES-2RS GE20FO-2RS GEG 20 ES-2RS GEH 20 ES-2RS GE 20 FO-2RS
GEG25ES-2RS GEH25ES-2RS GE25FO-2RS GEG 25 ES-2RS GEH 25 ES-2RS GE 25 FO-2RS
GEG30ES-2RS GEH30ES-2RS GE30FO-2RS GEG 30 ES-2RS GEH 30 ES-2RS GE 30 FO-2RS
GEG35ES-2RS GEH35ES-2RS GE35FO-2RS GEG 35 ES-2RS GEH 35 ES-2RS GE 35 FO-2RS
GEG40ES-2RS GEH40ES-2RS GE40FO-2RS GEG 40 ES-2RS GEH 40 ES-2RS GE 40 FO-2RS
GEG45ES-2RS GEH45ES-2RS GE45FO-2RS GEG 45 ES-2RS GEH 45 ES-2RS GE 45 FO-2RS
GEG50ES-2RS GEH50ES-2RS GE50FO-2RS GEG 50 ES-2RS GEH 50 ES-2RS GE 50 FO-2RS
GEG60ES-2RS GEH60ES-2RS GE60FO-2RS GEG 60 ES-2RS GEH 60 ES-2RS GE 60 FO-2RS
GEG70ES-2RS GEH70ES-2RS GE70FO-2RS GEG 70 ES-2RS GEH 70 ES-2RS GE 70 FO-2RS
GEG80ES-2RS GEH80ES-2RS GE80FO-2RS GEG 80 ES-2RS GEH 80 ES-2RS GE 80 FO-2RS
GEG90ES-2RS GEH90ES-2RS GE90FO-2RS GEG 90 ES-2RS GEH 90 ES-2RS GE 90 FO-2RS
GEG100ES-2RS GEH100ES-2RS GE100FO-2RS GEG 100 ES-2RS GEH 100 ES-2RS GE 100 FO-2RS
GEG110ES-2RS GEH110ES-2RS GE110FO-2RS GEG 110 ES-2RS GEH 110 ES-2RS GE 110 FO-2RS
GEG120ES-2RS GEH120ES-2RS GE120FO-2RS GEG 120 ES-2RS GEH 120 ES-2RS GE 120 FO-2RS
GEG140ES-2RS GEH140ES-2RS GE140FO-2RS GEG 140 ES-2RS GEH 140 ES-2RS GE 140 FO-2RS
GEG160ES-2RS GEH160ES-2RS GE160FO-2RS GEG 160 ES-2RS GEH 160 ES-2RS GE 160 FO-2RS
GEG180ES-2RS GEH180ES-2RS GE180FO-2RS GEG 180 ES-2RS GEH 180 ES-2RS GE 180 FO-2RS
GEG200ES-2RS GEH200ES-2RS GE200FO-2RS GEG 200 ES-2RS GEH 200 ES-2RS GE 200 FO-2RS
GEG220ES-2RS GEH220ES-2RS GE220FO-2RS GEG 220 ES-2RS GEH 220 ES-2RS GE 220 FO-2RS
GEG240ES-2RS GEH240ES-2RS GE240FO-2RS GEG 240 ES-2RS GEH 240 ES-2RS GE 240 FO-2RS
GEG260ES-2RS GEH260ES-2RS GE260FO-2RS GEG 260 ES-2RS GEH 260 ES-2RS GE 260 FO-2RS
GEG280ES-2RS GEH280ES-2RS GE280FO-2RS GEG 280 ES-2RS GEH 280 ES-2RS GE 280 FO-2RS

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Bearing Structure: Split Plain Bearing
Type of Lubricant: Oil-Lubricated Bearing
Lubricant & Load: Hydrodynamic Bearing
Bushing Material: Self-Lubrication
Bearing Direction: Radial
Lubricating Way: Maintenance-Free Bearing
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

rod end bearing

Contribution of Rod End Bearings to Complex Motion in Industrial Machinery

Rod end bearings play a significant role in ensuring the proper functioning of industrial machinery with complex motion. Here’s how they contribute:

1. Articulation and Pivoting:

Industrial machinery often requires components that can pivot and articulate in multiple directions. Rod end bearings provide a flexible connection point, allowing for a wide range of motion. They are commonly used in applications like robotic arms, conveyor systems, and material handling equipment, where precise movement and adaptability are essential.

2. Load Transmission:

Industrial machinery frequently deals with heavy loads and dynamic forces. Rod end bearings efficiently transmit these loads from moving components to stationary structures. Whether it’s the linear movement of a press or the tilting motion of a heavy-duty crane, rod end bearings enable the smooth transfer of forces, reducing wear and tear on the machinery.

3. Misalignment Compensation:

Machinery parts can become misaligned due to manufacturing tolerances, wear, or other factors. Rod end bearings excel at compensating for misalignments, ensuring that moving parts remain connected and operational. This capability is crucial in applications with variable alignment requirements, such as industrial automation systems and assembly line equipment.

4. Precision and Control:

Many industrial processes demand precision and control over motion. Rod end bearings help achieve this by providing a reliable connection point that can be adjusted and fine-tuned. This precision is essential in applications like CNC machinery, where the accuracy of tool movement directly impacts the quality of the final product.

5. Corrosion Resistance:

Industrial machinery operates in diverse environments, some of which may expose components to moisture and corrosive substances. Rod end bearings are available in various materials, including stainless steel, which offers excellent corrosion resistance. This ensures the bearings’ longevity and reliability, even in challenging conditions.

Overall, rod end bearings contribute to the efficient and reliable operation of industrial machinery with complex motion requirements. Their ability to accommodate articulation, handle heavy loads, compensate for misalignment, provide precision, and resist corrosion makes them invaluable components in various industrial applications.

rod end bearing

Challenges and Solutions in Managing Load and Misalignment in Rod End Bearings

Rod end bearings often face challenges related to load capacity and misalignment in various applications. Here are the common challenges and solutions:

1. Radial and Axial Loads:

Challenge: Rod end bearings need to handle both radial and axial loads simultaneously in many applications.

Solution: Select rod end bearings with appropriate load ratings and materials to ensure they can withstand the expected loads. Also, proper maintenance and lubrication are essential for maximizing load-carrying capacity.

2. Misalignment:

Challenge: Misalignment can cause premature wear and reduced bearing lifespan.

Solution: Use self-aligning rod end bearings or incorporate spherical plain bearings to compensate for misalignment. Regular inspection and maintenance to correct any alignment issues are crucial.

3. Corrosion and Contaminants:

Challenge: Exposure to moisture, chemicals, and contaminants can lead to corrosion and damage.

Solution: Choose rod end bearings with suitable protective coatings or seals, such as PTFE liners or rubber boots, to prevent contaminants from entering. Stainless steel bearings offer enhanced corrosion resistance.

4. Lubrication:

Challenge: Inadequate lubrication can result in increased friction, overheating, and premature failure.

Solution: Follow the manufacturer’s lubrication recommendations and maintenance schedules. Proper lubrication ensures smooth operation and extends bearing life.

5. Shock and Impact Loads:

Challenge: Applications with frequent shock and impact loads can subject rod end bearings to excessive stress.

Solution: Choose rod end bearings with robust construction and materials to withstand shock loads. Regular inspections are necessary to detect early signs of damage.

By addressing these challenges with appropriate solutions, rod end bearings can perform optimally and provide long-lasting service in a wide range of applications.

rod end bearing

Advantages of Rod End Bearings

Rod end bearings offer several advantages compared to other bearing types, making them suitable for specific applications that require articulation, flexibility, and precise control. Here are some key advantages of rod end bearings:

  • Articulation: Rod end bearings are designed to provide articulation, enabling movement in multiple directions. They allow for angular misalignment, making them ideal for applications that require flexible connections and motion control.
  • Angular Misalignment: They can accommodate both static and dynamic angular misalignment. This ability to handle misalignment is a significant advantage in applications where components may not align perfectly.
  • High Load Capacity: Rod end bearings are capable of handling both static and dynamic loads. They are used in applications where significant forces or loads need to be transmitted, such as in heavy machinery and construction equipment.
  • Precision: These bearings provide precise control and movement. They are often used in applications where accurate positioning and control of mechanical components are essential, such as in aerospace and robotics.
  • Corrosion Resistance: Many rod end bearings are available with corrosion-resistant coatings or materials, making them suitable for use in challenging environments, including marine and industrial settings.
  • Durability: Rod end bearings are built to withstand harsh conditions, making them durable and long-lasting. They can handle the rigors of heavy-duty applications, ensuring reliability and performance over time.
  • Versatility: These bearings find applications in a wide range of industries, from automotive and aerospace to industrial machinery and marine. Their versatility is a significant advantage for engineers and designers.

Overall, rod end bearings excel in applications that require a combination of articulation, load-bearing capacity, and precision. Their ability to handle misalignment and provide reliable performance in demanding environments makes them a preferred choice in various industries.

China wholesaler Precision Bearing of Radial Spherical Plain Bearings (GEG20ES)   supplierChina wholesaler Precision Bearing of Radial Spherical Plain Bearings (GEG20ES)   supplier
editor by CX 2024-05-15

China Standard GEZ38ES-2RS GEZ44ES-2RS GEZ50ES-2RS GEZ57ES-2RS GEZ63ES-2RShxhv thrust spherical plain bearings with Great quality

Product Description

HXHV Spherical Plain Bearing

Model Number Bore Diameter (mm) Outersdie Diameter (mm) Width (mm) Weight (kg)
GEZ19ES-2RS 19.05 mm 31.75 mm 16.662 mm 0.053 kg
GEZ19ES-2RS 0.75 mm 1.25 mm 0.656 mm 0.053 kg
GEZ22ES-2RS 22.225 mm 36.513 mm 19.431 mm 0.085 kg
GEZ22ES-2RS 0.875 mm 1.4375 mm 0.756 mm 0.085 kg
GEZ25ES-2RS 25.4 mm 41.275 mm 22.225 mm 0.121 kg
GEZ25ES-2RS 1 mm 1.625 mm 0.875 mm 0.121 kg
GEZ31ES-2RS 31.75 mm 50.8 mm 27.762 mm 0.23 kg
GEZ31ES-2RS 1.25 mm 2 mm 1.093 mm 0.23 kg
GEZ34ES-2RS 34.925 mm 55.563 mm 30.15 mm 0.35 kg
GEZ34ES-2RS 1.375 mm 2.1875 mm 1.187 mm 0.35 kg
GEZ38ES-2RS 38.1 mm 61.913 mm 33.325 mm 0.42 kg
GEZ38ES-2RS 1.5 mm 2.4375 mm 1.312 mm 0.42 kg
GEZ44ES-2RS 44.45 mm 71.438 mm 38.887 mm 0.64 kg
GEZ44ES-2RS 1.75 mm 2.8125 mm 1.531 mm 0.64 kg
GEZ50ES-2RS 50.8 mm 80.963 mm 44.45 mm 0.93 kg
GEZ50ES-2RS 2 mm 3.1875 mm 1.75 mm 0.93 kg
GEZ57ES-2RS 57.15 mm 90.488 mm 50.013 mm 1.3 kg
GEZ57ES-2RS 2.25 mm 3.5625 mm 1.969 mm 1.3 kg
GEZ63ES-2RS 63.5 mm 100.013 mm 55.55 mm 1.85 kg
GEZ63ES-2RS 2.5 mm 3.9375 mm 2.187 mm 1.85 kg

Packing:

Universal Packing

Without any logo on bearings or packing.

HXHV Packing

With our brand HXHV on bearings and packing.

Customized Packing

Depends on buyer’s requirements.

Original Brand Packing

Bearing and packing are both original. Please contact us for pictures.

OEM Service:
If you need special requirement about bearing’s size, logo, or packing, please contact us.

Certificate:
Our bearings comes with CE certificate and our company has been verified by SGS Group. Please contact us for clear certificate photos.

Other Bearings:
We supply different types of linear guides, ball bearings, roller bearings with chrome steel, stainless steel, ceramic materials. 
Please contact us for more details and the latest price

To get our catalog and the latest price, please contact us. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Rolling Element: Single Row
Structure: Thrust
Material: Bearing Steel
Load Direction: Thrust Spherical Plain Bearing
Add Lubricant: Oil Lubrication
Outer Structure: Outer Ring of Single-Slit
Samples:
US$ 2.49/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

rod end bearing

Role of Seals and Boots in Protecting Rod End Bearings

Seals and boots serve a crucial role in safeguarding rod end bearings from contaminants and moisture in various applications. Here’s an overview of their functions:

Contaminant Protection:

Rod end bearings are often exposed to harsh environments, including dust, dirt, debris, and other contaminants. Seals and boots create a protective barrier around the bearing’s moving parts, preventing these contaminants from entering the bearing’s internal components.

By effectively sealing off the bearing, they help maintain the integrity of the lubricant and prevent abrasive particles from causing premature wear or damage to the bearing surfaces. This is especially important in applications where cleanliness and reliability are critical, such as aerospace, automotive, industrial machinery, and more.

Moisture Resistance:

In applications where exposure to moisture is a concern, seals and boots act as a defense against water, humidity, and other liquid contaminants. This is vital for preventing corrosion and maintaining the performance of the rod end bearing over time.

Seals and boots are often made from materials that are resistant to moisture, enhancing their protective capabilities. They create a barrier that keeps water away from sensitive bearing components, such as rolling elements and raceways.

Increased Lifespan:

By preventing contaminants and moisture from infiltrating the bearing, seals and boots extend the lifespan of the rod end bearing. They contribute to the overall durability and reliability of the bearing in various applications, ultimately reducing maintenance requirements and replacement intervals.

It’s important to select the right type of seal or boot for a specific application, taking into account factors such as the level of contamination, exposure to moisture, operating conditions, and temperature range. Proper maintenance and periodic inspection of seals and boots are also essential to ensure continued protection and optimal bearing performance.

rod end bearing

Signs of Wear or Damage in Rod End Bearings and Replacement Guidelines

Rod end bearings are critical components in various mechanical systems, and it’s essential to monitor them for signs of wear or damage. Here are common indicators and guidelines for replacement:

1. Excessive Play or Looseness: If you notice excessive play or looseness in the rod end bearing, it’s a clear sign of wear. This can result in imprecise control and reduced system performance, so replacement is recommended.

2. Unusual Noises: Unusual noises such as knocking, clicking, or squeaking during movement are often indicative of rod end bearing issues. These noises can be a result of worn bearing surfaces or damaged components. Address the problem promptly to prevent further damage.

3. Corrosion or Rust: Exposure to moisture or harsh environmental conditions can lead to corrosion and rust on rod end bearings. Corroded bearings may not move smoothly, impacting system operation. If you observe significant corrosion, consider replacement.

4. Visible Damage: Any visible damage, such as cracks, dents, or deformation of the bearing’s body or components, should be taken seriously. Damaged rod end bearings can fail unexpectedly, leading to safety risks and system malfunctions. Replace them if damage is detected.

5. Reduced Range of Motion: If the rod end bearing restricts the range of motion or does not articulate smoothly, it may be worn or damaged. This can affect the performance of the associated system. Replacement is advisable to restore proper functionality.

6. Increased Friction: A sudden increase in friction during movement can indicate a lack of lubrication, contamination, or damage to the bearing surfaces. Re-greasing and cleaning may help, but if the issue persists, consider replacing the bearing.

7. Maintenance Intervals: Depending on the application, rod end bearings may have recommended maintenance intervals. Follow these guidelines and inspect the bearings during routine maintenance. If wear or damage is detected, replace them as necessary.

8. Safety Concerns: In safety-critical applications, it’s vital to prioritize bearing replacement at the first sign of wear or damage. Failure to do so can result in accidents or system failures with serious consequences.

Regular inspection and maintenance of rod end bearings are essential to ensure the continued reliability and performance of mechanical systems. When any of the above signs are observed, it’s advisable to replace the bearings promptly to prevent further issues and potential safety risks.

rod end bearing

Factors to Consider When Selecting a Rod End Bearing for a Specific Application

Choosing the right rod end bearing for a specific application is crucial to ensure optimal performance and longevity. Several factors should be taken into account during the selection process:

1. Load Capacity: Consider the magnitude and type of loads the bearing will need to support. Determine whether it will experience radial, axial, or a combination of loads. Select a rod end bearing with the appropriate load capacity rating to handle these loads.

2. Misalignment: Evaluate the degree of angular misalignment that may occur in the application. Some rod end bearings are designed to compensate for misalignment better than others. Choose a bearing that can accommodate the expected misalignment without compromising performance.

3. Environment: Take into account the operating environment. Consider factors like temperature, humidity, chemical exposure, and the presence of contaminants. Select a rod end bearing with suitable materials and protective features to withstand these conditions.

4. Lubrication: Proper lubrication is essential for the longevity and smooth operation of rod end bearings. Determine the lubrication method and frequency required for the application. Some rod end bearings come with built-in lubrication provisions or self-lubricating materials.

5. Thread Type and Size: The threaded shank of the rod end bearing should match the components it connects to. Consider the thread size and type (e.g., right-hand or left-hand threads) to ensure compatibility with your application.

6. Corrosion Resistance: If the application is in a corrosive environment, select a rod end bearing with corrosion-resistant materials or coatings. This is especially important in marine, chemical, or industrial settings.

7. Size and Weight Constraints: Ensure that the chosen rod end bearing fits within the space and weight limitations of the application. Measure the available space and consider weight restrictions when making your selection.

8. Operating Speed: Take into account the rotational or oscillatory speed of the bearing. Some rod end bearings are designed for high-speed applications, while others are better suited for low-speed or static applications.

9. Regulatory Compliance: In some industries, specific standards or regulations may apply to components like rod end bearings. Ensure that the selected bearing complies with any relevant industry standards or requirements.

10. Budget Constraints: While quality is essential, consider your budget constraints. Different rod end bearings come with varying price points. Choose a bearing that provides the necessary performance without exceeding your budget.

By carefully considering these factors, you can select the most suitable rod end bearing for your specific application, ensuring reliable and efficient operation.

China Standard GEZ38ES-2RS GEZ44ES-2RS GEZ50ES-2RS GEZ57ES-2RS GEZ63ES-2RShxhv thrust spherical plain bearings   with Great qualityChina Standard GEZ38ES-2RS GEZ44ES-2RS GEZ50ES-2RS GEZ57ES-2RS GEZ63ES-2RShxhv thrust spherical plain bearings   with Great quality
editor by CX 2024-05-14

China high quality Factory Price Silent CZPT Ge220CS-2z Ge240CS-2z Ge260CS-2z Ge280CS-2z Spherical Plain Bearing for Machinery with high quality

Product Description

Factory Price Silent CZPT GE220CS-2Z GE240CS-2Z GE260CS-2Z GE280CS-2Z Spherical Plain Bearing for Machinery 

A wide range of applications:

• agriculture and forestry equipment
• automotive and industrial gearboxes
• automotive and truck electric components, such as alternators
• electric motors
• fluid machinery
• material handling
• power tools and household appliances
• textile machinery
• two Wheeler.

 

Our Bearing Advantage:

1.Free Sample bearing

2.ISO Standard

3.Bearing Small order accepted

4.In Stock bearing

5.OEM bearing service

6.Professional:16 years manufacture bearing

7.Customized bearing, Customer’s bearing drawing or samples accepted

8.Competitive price bearing

9.TT Payment or Western Union or Trade Assurance Order
 

Product name Spherical Plain Bearing
Brand Name KHRD
Material Chrome Steel GCR15
Size  Standerd
Package Plastic Bag+Carton+Pallet
MOQ 1PCS
Service OEM
Sample Available
Payment TT or Western Union
Port HangZhou

Products Display

Q: Are you a trading company or a manufacturer ?
A: We are a manufacturer more than 16 years with professional skill.

Q:Do you provide samples ? Are they free or extra ?
A:Yes, we could offer the sample, while could you pay for the freight?

Q:What kind of freight will you use?
A:Shipment, FedEx, TNT, DHL, UPS and EMS etc.

Q:Could you make bearings with our OEM logo,color and packing?
A: Of course. Please inform us your brand logo,color and packing.

Q: How long is your delivery time?
A: Generally it will be 3-7 days if the goods are in stock; while it will be 15-30 days if the goods are not in stock, which is according to your quantity.

Q: Will you check these products before shipment?
A: Yes, products will be strictly inspected by our own professional QC Process System before shipment.

Q: What’s the Payment Terms ?
A: Usually we accept T/T ,western union ,and order online.

If you want to know more details, please contact us. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Rolling Element: Single Row
Structure: To The Heart
Material: Bearing Steel
Samples:
US$ 1/Set
1 Set(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

rod end bearing

Differences Between Male and Female Threaded Rod End Bearings

Male and female threaded rod end bearings differ in their design and applications:

Male Threaded Rod End Bearings:

– Male rod end bearings have external threads on the shank or body of the bearing.

– They are typically used in applications where the bearing is mounted to a stationary component, and the threaded shank extends to connect with a mating part (e.g., a linkage or control arm).

– Male rod end bearings allow for easy adjustment or fine-tuning of the connection.

– These bearings are suitable for applications requiring controlled movement or positioning, where the bearing’s external threads facilitate precise adjustments.

Female Threaded Rod End Bearings:

– Female rod end bearings have an internal (female) threaded bore inside the housing.

– They are used when a bolt, stud, or shaft with external threads needs to be connected to the bearing’s housing.

– Female rod end bearings are often employed in applications where the bearing needs to rotate around a fixed shaft or bolt, providing articulation and misalignment capabilities.

– These bearings allow for the attachment of a variety of external components, making them versatile for different applications.

The choice between male and female threaded rod end bearings depends on the specific requirements of the application, including whether the bearing needs to be attached to a stationary part or connected to an external threaded component and the level of adjustability and articulation needed.

rod end bearing

Challenges and Solutions in Managing Load and Misalignment in Rod End Bearings

Rod end bearings often face challenges related to load capacity and misalignment in various applications. Here are the common challenges and solutions:

1. Radial and Axial Loads:

Challenge: Rod end bearings need to handle both radial and axial loads simultaneously in many applications.

Solution: Select rod end bearings with appropriate load ratings and materials to ensure they can withstand the expected loads. Also, proper maintenance and lubrication are essential for maximizing load-carrying capacity.

2. Misalignment:

Challenge: Misalignment can cause premature wear and reduced bearing lifespan.

Solution: Use self-aligning rod end bearings or incorporate spherical plain bearings to compensate for misalignment. Regular inspection and maintenance to correct any alignment issues are crucial.

3. Corrosion and Contaminants:

Challenge: Exposure to moisture, chemicals, and contaminants can lead to corrosion and damage.

Solution: Choose rod end bearings with suitable protective coatings or seals, such as PTFE liners or rubber boots, to prevent contaminants from entering. Stainless steel bearings offer enhanced corrosion resistance.

4. Lubrication:

Challenge: Inadequate lubrication can result in increased friction, overheating, and premature failure.

Solution: Follow the manufacturer’s lubrication recommendations and maintenance schedules. Proper lubrication ensures smooth operation and extends bearing life.

5. Shock and Impact Loads:

Challenge: Applications with frequent shock and impact loads can subject rod end bearings to excessive stress.

Solution: Choose rod end bearings with robust construction and materials to withstand shock loads. Regular inspections are necessary to detect early signs of damage.

By addressing these challenges with appropriate solutions, rod end bearings can perform optimally and provide long-lasting service in a wide range of applications.

rod end bearing

Applications and Industries Using Rod End Bearings

Rod end bearings find application across various industries and serve multiple purposes due to their versatility and design. Common applications and sectors where rod end bearings are used include:

1. Automotive: Rod end bearings are utilized in vehicle suspension systems, steering linkages, and throttle linkages, contributing to precise control and smooth movement.

2. Aerospace: They play a crucial role in aircraft control systems, ensuring reliable and precise movement in critical flight control components.

3. Construction and Heavy Machinery: These bearings are used in heavy equipment like cranes, excavators, and loaders for precise positioning and movement in various parts of the machinery.

4. Manufacturing: In manufacturing machinery, rod end bearings are employed for automation and motion control applications, ensuring accurate and smooth movement in industrial processes.

5. Agricultural Equipment: Farm machinery, such as tractors and combines, use rod end bearings in steering systems, hydraulics, and other mechanical components.

6. Robotics: Rod end bearings are critical in robotic arms and automation systems, facilitating precise movement and control in manufacturing, medical, and other industries.

7. Marine and Offshore: They are used in marine applications, contributing to reliable control and movement in boat steering systems and offshore equipment.

8. Medical Equipment: In medical devices and equipment, rod end bearings ensure precise and smooth movement, making them essential in applications like surgical robots and diagnostic instruments.

9. Racing and Motorsports: Rod end bearings are used in high-performance vehicles for suspension and steering systems, where precise control is paramount.

10. Material Handling: Conveyor systems and material handling equipment benefit from rod end bearings, ensuring efficient movement and transport of goods.

11. Renewable Energy: They play a role in solar tracking systems and wind turbine applications, helping to adjust panel angles and rotor blades for optimal energy capture.

12. Rail and Transportation: In rail systems and transportation equipment, rod end bearings are employed in various components, including doors, brakes, and suspension systems.

13. Sports and Fitness Equipment: In gym equipment and sports machinery, they provide smooth and reliable motion in treadmills, exercise bikes, and more.

Rod end bearings are valued for their ability to provide reliable and precise movement in a wide range of applications, contributing to the efficiency and safety of various industries.

China high quality Factory Price Silent CZPT Ge220CS-2z Ge240CS-2z Ge260CS-2z Ge280CS-2z Spherical Plain Bearing for Machinery   with high qualityChina high quality Factory Price Silent CZPT Ge220CS-2z Ge240CS-2z Ge260CS-2z Ge280CS-2z Spherical Plain Bearing for Machinery   with high quality
editor by CX 2024-05-14

China OEM Si18t/K Ball Joint Rod Ends Female Thread Ball Joint Manufacture manufacturer

Product Description

Brand Name

SHAC

Precision Rating

g6

Material

CK45 Zinc plated

Model Number

PHS.POS.SI“`TK.SA“`TK,SQ

Quality Guarantee

One year

HS Code

8483300090

Customized

OEM avalialbe

Products packing

According to our customer’s request,Plastic bag+inner box.

Payment terms

TT, L/C, Western Union, Paypal

Deliver time

Base on customer required quantity,by negotiated

Samples

free samples and sample catalogue available

Ball Screw Application                                                         

machine tools,Industrial Machinery,Pringting Machine,Paper-processing machine,automatic machines,textiles machines,electronic machinery,transport machinery,Robot,etc

Model Number as Follows:

POS:  POS5 POS6 POS8 POS10 POS12 POS14 POS16
  POS18 POS20 POS22 POS25 POS28 POS30  
PHS: PHS5 PHS6 PHS8 PHS10 PHS12 PHS14 PHS16
  PHS18 PHS20 PHS22 PHS25 PHS28 PHS30  
SI···TK SI5TK SI6TK SI8TK SI10TK SI12TK SI14TK SI16TK
  SI18TK SI20TK SI22TK SI25TK SI28TK SI30TK  
SA···TK SA5TK SA6TK SA8TK SA10TK SA12TK SA14TK SA16TK
  SA18TK SA20TK SA22TK SA25TK SA28TK SA30TK  
 
   

Our factory

We are ZheJiang technology joint venture factory in China, professional manufacturer linear CZPT and ball screw to global market with good quality and reasonable price. with ISO9001 & ISO14001 approved.
Mainly products SHAC brand linear CZPT is interworking with HIWIN linear guide,ball screw parameter same as TBI ballscrew. We already export our products to some market such as USA, Europe, East Korea,South America, North America,Southeast Asia,Indian,etc.

Q1: Do you accept small order?

A: If your order bearings are our standard size, we accept even 1pcs.
Q2: Can I get free sample?
A: Yes. Limited,free sample available, freight cost must be paid by your side.
Q3: Are you factory or trade company?
A: We are manufacturer, ZheJiang technology team joint venture factory.
Q4: Can we mark our brand on your bearings and packing?
A: Yes, we support OEM your brand, the details let’s negotiation.
Q5: How long is the delivery?
A: Small orders usually takes 3-7 days,big order usually 20-35 days, depending on orders quantity and whether are standard size.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Rolling Element: Single Row
Structure: Rod End
Material: Bearing Steel
Load Direction: Radial Spherical Plain Bearing
Add Lubricant: Non Self-lubricating
Outer Structure: Whole Outer Ring
Customization:
Available

|

Customized Request

rod end bearing

Impact of Temperature Variations and Environmental Conditions on Rod End Bearing Performance

Rod end bearings can be affected by temperature variations and environmental conditions, which may impact their performance. Here’s how these factors come into play:

1. Temperature Variations:

Temperature changes can influence the lubrication and material properties of rod end bearings. Extreme cold can cause lubricants to thicken, potentially leading to increased friction and reduced efficiency. On the other hand, high temperatures can cause lubricants to thin, which may result in inadequate lubrication and accelerated wear. Proper lubrication and material selection are crucial to ensure that rod end bearings operate optimally across a range of temperatures.

2. Contaminants and Moisture:

Industrial environments often expose rod end bearings to contaminants such as dust, dirt, and chemicals. Additionally, moisture and humidity can lead to corrosion and reduced bearing lifespan. Seals and boots can help protect rod end bearings from these elements, maintaining their performance and preventing premature failure. Regular maintenance, including cleaning and re-lubrication, is essential to counteract the effects of contaminants and moisture.

3. Corrosion Resistance:

Rod end bearings are available in various materials, including stainless steel, which offers excellent corrosion resistance. This is especially important in environments where exposure to moisture or chemical agents is common. Choosing the right material for the specific environmental conditions is crucial to prevent corrosion-related issues and ensure the long-term functionality of the bearings.

4. Material Expansion and Contraction:

Temperature variations can lead to the expansion and contraction of materials. This can affect the clearances within the bearing, potentially causing issues such as increased play or reduced load-carrying capacity. Proper bearing design and material selection, as well as regular inspections, can mitigate these effects.

5. Lubrication Intervals:

In extreme temperature or environmental conditions, more frequent lubrication may be necessary to maintain optimal performance and protect rod end bearings from premature wear. Lubricants should be chosen based on their suitability for the given operating conditions.

Overall, temperature variations and environmental conditions can impact rod end bearing performance. Proper maintenance, material selection, and environmental safeguards, such as seals and boots, are essential to ensure that rod end bearings continue to function reliably in diverse operating environments.

rod end bearing

Contribution of Rod End Bearings to Smooth Movement in Automotive Control Systems

Rod end bearings play a crucial role in ensuring the smooth movement of control systems in various automotive applications. Here’s how they contribute:

1. Steering Systems:

Rod end bearings are used in steering linkages and tie rod ends. They provide the necessary articulation and pivoting to allow the front wheels to turn smoothly, enabling precise steering control. The low friction and high load-bearing capacity of rod end bearings contribute to responsive and accurate steering in both manual and power steering systems.

2. Suspension Systems:

In suspension systems, rod end bearings are used in components like control arms and stabilizer links. They allow for controlled movement of the suspension, ensuring that the vehicle’s wheels maintain optimal contact with the road surface. This contributes to a smoother and more comfortable ride, improved handling, and better traction, especially when driving over uneven or bumpy terrain.

3. Throttle and Accelerator Linkages:

Rod end bearings are employed in throttle and accelerator linkages, where they assist in transmitting pedal inputs to the engine’s throttle body. The smooth articulation provided by rod end bearings ensures that drivers can easily modulate engine power, contributing to smooth acceleration and deceleration.

4. Gear Shift Linkages:

In manual transmissions, rod end bearings are used in gear shift linkages. They enable precise and smooth gear changes by allowing for the controlled movement of the shift lever. This ensures that gears engage smoothly, reducing drivetrain shock and vibration.

5. Convertible Roof Mechanisms:

In convertible cars, rod end bearings are used in the mechanisms that operate the folding and unfolding of the convertible roof. The smooth articulation of rod end bearings contributes to the seamless transition between open and closed roof positions, enhancing the overall driving experience.

Overall, rod end bearings are integral components in automotive control systems, ensuring the smooth and precise operation of various critical functions, including steering, suspension, throttle control, gear shifting, and convertible roof movement.

rod end bearing

Impact of Proper Lubrication on Rod End Bearings

Proper lubrication is crucial for enhancing the performance and extending the longevity of rod end bearings. Here’s how it impacts these aspects:

1. Reduced Friction: Lubrication creates a film between moving parts, reducing friction. This minimizes wear and heat generation, leading to smoother and more efficient operation of the rod end bearing.

2. Wear Prevention: Lubrication helps prevent wear and surface damage on bearing components, particularly the ball and raceway. This is vital for the long-term durability of the bearing.

3. Corrosion Resistance: In applications exposed to moisture or corrosive substances, lubrication provides a protective barrier, preventing rust and corrosion on the bearing’s surfaces. This is especially important in outdoor or marine environments.

4. Noise Reduction: Adequate lubrication reduces noise and vibration in the bearing. This is important for applications where noise levels must be minimized, such as in the aerospace or medical industries.

5. Temperature Control: Lubrication helps dissipate heat generated by friction. Effective temperature control prevents overheating, which can lead to premature bearing failure.

6. Seal and Shield Function: Lubrication also works in conjunction with bearing seals and shields to keep contaminants out. It maintains a clean and contaminant-free internal environment, further increasing the bearing’s longevity.

7. Longevity: Proper lubrication significantly extends the service life of rod end bearings. Regular maintenance and relubrication schedules are essential for maximizing the bearing’s operational lifespan.

8. Efficiency: Lubrication contributes to the overall efficiency of the bearing, ensuring that it operates at peak performance levels, even under heavy loads or misalignment conditions.

9. Performance Consistency: Adequate lubrication helps maintain consistent performance over time. This is especially important in critical applications where performance fluctuations could lead to safety or quality concerns.

It’s important to use the lubricant recommended by the bearing manufacturer and follow their guidelines for lubrication intervals. Over-lubrication can be as detrimental as under-lubrication, so maintaining the right balance is essential.

Regular inspections and maintenance routines should be established to monitor the lubrication condition and reapply lubricant as needed. This proactive approach ensures that rod end bearings operate effectively, offering reliability and a longer service life.

China OEM Si18t/K Ball Joint Rod Ends Female Thread Ball Joint Manufacture   manufacturerChina OEM Si18t/K Ball Joint Rod Ends Female Thread Ball Joint Manufacture   manufacturer
editor by CX 2024-05-14

Good quality

rod end bearing

Improving Aircraft Functionality with Rod End Bearings

Rod end bearings play a critical role in enhancing the functionality and safety of various aircraft components, including control surfaces and landing gear. Here’s how:

Aircraft Control Surfaces:

Rod end bearings are commonly used in aircraft control systems to connect control surfaces, such as ailerons, elevators, and rudders, to control cables or rods. These bearings provide several key benefits:

  • Articulation: Rod end bearings offer articulation capabilities, allowing control surfaces to move smoothly and precisely. This flexibility is essential for pilots to control the aircraft’s attitude, roll, pitch, and yaw.
  • Misalignment Compensation: Aircraft structures experience various forces and vibrations during flight. Rod end bearings accommodate misalignment, ensuring that control systems remain effective even under dynamic conditions.
  • Durability: Aircraft operate in challenging environments, and rod end bearings are designed to withstand extreme temperatures, vibrations, and mechanical stress. Their robust construction contributes to the longevity and reliability of control systems.
  • Weight Savings: Aircraft design prioritizes weight reduction. Rod end bearings, typically made from lightweight materials like high-strength alloys or composites, help minimize the overall weight of the aircraft.

Landing Gear:

Rod end bearings are also utilized in landing gear systems, which are critical for safe takeoffs, landings, and ground operations. Their contributions include:

  • Shock Absorption: Landing gear components, including rod end bearings, play a role in shock absorption during landing, reducing the impact forces transmitted to the aircraft’s structure and passengers.
  • Articulation for Retraction and Extension: Rod end bearings enable the controlled movement of landing gear components, allowing for smooth retraction and extension. This is crucial for aerodynamic efficiency and safety.
  • Structural Integrity: Rod end bearings help maintain the structural integrity of the landing gear assembly, ensuring that it can support the aircraft’s weight during ground operations.

Overall, rod end bearings in aircraft applications contribute to the precise control, safety, and structural reliability necessary for aviation. Their ability to handle articulation, misalignment, and challenging operating conditions makes them indispensable components in the aerospace industry.

rod end bearing

Contribution of Rod End Bearings to Smooth Movement in Automotive Control Systems

Rod end bearings play a crucial role in ensuring the smooth movement of control systems in various automotive applications. Here’s how they contribute:

1. Steering Systems:

Rod end bearings are used in steering linkages and tie rod ends. They provide the necessary articulation and pivoting to allow the front wheels to turn smoothly, enabling precise steering control. The low friction and high load-bearing capacity of rod end bearings contribute to responsive and accurate steering in both manual and power steering systems.

2. Suspension Systems:

In suspension systems, rod end bearings are used in components like control arms and stabilizer links. They allow for controlled movement of the suspension, ensuring that the vehicle’s wheels maintain optimal contact with the road surface. This contributes to a smoother and more comfortable ride, improved handling, and better traction, especially when driving over uneven or bumpy terrain.

3. Throttle and Accelerator Linkages:

Rod end bearings are employed in throttle and accelerator linkages, where they assist in transmitting pedal inputs to the engine’s throttle body. The smooth articulation provided by rod end bearings ensures that drivers can easily modulate engine power, contributing to smooth acceleration and deceleration.

4. Gear Shift Linkages:

In manual transmissions, rod end bearings are used in gear shift linkages. They enable precise and smooth gear changes by allowing for the controlled movement of the shift lever. This ensures that gears engage smoothly, reducing drivetrain shock and vibration.

5. Convertible Roof Mechanisms:

In convertible cars, rod end bearings are used in the mechanisms that operate the folding and unfolding of the convertible roof. The smooth articulation of rod end bearings contributes to the seamless transition between open and closed roof positions, enhancing the overall driving experience.

Overall, rod end bearings are integral components in automotive control systems, ensuring the smooth and precise operation of various critical functions, including steering, suspension, throttle control, gear shifting, and convertible roof movement.

rod end bearing

Impact of Proper Lubrication on Rod End Bearings

Proper lubrication is crucial for enhancing the performance and extending the longevity of rod end bearings. Here’s how it impacts these aspects:

1. Reduced Friction: Lubrication creates a film between moving parts, reducing friction. This minimizes wear and heat generation, leading to smoother and more efficient operation of the rod end bearing.

2. Wear Prevention: Lubrication helps prevent wear and surface damage on bearing components, particularly the ball and raceway. This is vital for the long-term durability of the bearing.

3. Corrosion Resistance: In applications exposed to moisture or corrosive substances, lubrication provides a protective barrier, preventing rust and corrosion on the bearing’s surfaces. This is especially important in outdoor or marine environments.

4. Noise Reduction: Adequate lubrication reduces noise and vibration in the bearing. This is important for applications where noise levels must be minimized, such as in the aerospace or medical industries.

5. Temperature Control: Lubrication helps dissipate heat generated by friction. Effective temperature control prevents overheating, which can lead to premature bearing failure.

6. Seal and Shield Function: Lubrication also works in conjunction with bearing seals and shields to keep contaminants out. It maintains a clean and contaminant-free internal environment, further increasing the bearing’s longevity.

7. Longevity: Proper lubrication significantly extends the service life of rod end bearings. Regular maintenance and relubrication schedules are essential for maximizing the bearing’s operational lifespan.

8. Efficiency: Lubrication contributes to the overall efficiency of the bearing, ensuring that it operates at peak performance levels, even under heavy loads or misalignment conditions.

9. Performance Consistency: Adequate lubrication helps maintain consistent performance over time. This is especially important in critical applications where performance fluctuations could lead to safety or quality concerns.

It’s important to use the lubricant recommended by the bearing manufacturer and follow their guidelines for lubrication intervals. Over-lubrication can be as detrimental as under-lubrication, so maintaining the right balance is essential.

Regular inspections and maintenance routines should be established to monitor the lubrication condition and reapply lubricant as needed. This proactive approach ensures that rod end bearings operate effectively, offering reliability and a longer service life.

Good quality Good quality
editor by CX 2024-05-13

China manufacturer GB/T9161 Standard Corrosion Resistance Wear Resistance High Quality Rod End Bearing Ge160es for Automotive Shock Absorbers connecting rod bearing

Product Description

Product Description

GB/T9161 Standard Corrosion Resistance Wear Resistance High Quality Rod End Bearing GE160ES  for automotive shock absorbers
The basic type of plain bearing is composed of inner and outer rings with spherical sliding spherical contact surface. The plain bearing is mainly composed of an inner ring with outer sphere and an outer ring with inner sphere, which can bear large load. According to its different types and structures, it can bear radial load, axial load or combined radial and axial load at the same time.
Self lubricating joint auxiliary bearing is used in water conservancy, professional machinery and other industries. Because the spherical sliding contact area of the joint bearing is large and the inclination angle is large, but also because most joint bearings adopt special process treatment methods, such as surface phosphating, galvanizing, chromium plating or outer sliding surface lining, pad inlay, spraying, etc. Therefore, it has large load capacity and impact resistance, and has the characteristics of corrosion resistance, wear resistance, self-aligning, good lubrication or self-lubrication without lubricating dirt pollution. Therefore, articulated bearings are widely used in swing motion, tilt motion and rotation motion with low speed.

 

Detailed Photos

 

 

Product Parameters

   

E series

 

     /mm

SI…E

SI…ES

 

SA…E

SA…ES

 

d

 

 

 

D

d1min

B

r1smin

α

d3

c1

max

d2

max

h

l1

min

l2

max

h1

l3

min

l4

max

l5

max

d4

max

d5

max

SI5E

SA5E

5

14

7

6

0.3

13°

M5

4.5

21

36

16

48

30

11

42

5.0

10

13

SI6E

SA6E

6

14

8

6

0.3

13°

M6

4.5

21

36

16

48

30

11

42

5.0

11

13

SI8E

SA8E

8

16

10

8

0.3

15°

M8

6.5

24

42

21

55

36

15

49

5.0

13

16

SI10E

SA10E

10

19

13

9

0.3

12°

M10

7.5

29

48

26

63

43

15

58

5.5

16

19

SI12E

SA12E

12

22

15

10

0.3

10°

M12

8.5

34

54

28

71

50

18

67

7.0

19

22

SI15ES

SA15ES

15

26

18

12

0.3

M14

10.5

40

63

34

83

61

21

81

8.0

22

26

SI17ES

SA17ES

17

30

20

14

0.3

10°

M16

11.5

46

69

36

92

67

24

90

10.0

25

29

SI20ES

SA20ES

20

35

24

16

0.3

M20×1.5

13.5

53

78

43

105

77

30

104

10.0

28

34

SI25ES

SA25ES

25

42

29

20

0.6

M24×2.0

18.0

64

94

53

126

94

36

126

12.0

35

42

SI30ES

SA30ES

30

47

34

22

0.6

M30×2.0

20.0

73

110

65

147

110

45

147

15.0

42

50

SI35ES

SA35ES

35

55

39

25

0.6

M36×3.0

22.0

82

140

82

182

125

60

167

15.0

48

58

SI40ES

SA40ES

40

62

45

28

0.6

M39×3.0

24.0

92

150

86

198

142

65

180

18.0

52

65

SI45ES

SA45ES

45

68

50

32

0.6

M42×3.0

28.0

102

163

92

217

145

65

199

20.0

58

70

SI50ES

SA50ES

50

75

55

35

0.6

M45×3.0

31.0

112

185

104

246

160

68

221

20.0

62

75

SI60ES

SA60ES

60

90

66

44

1.0

M52×3.0

39.0

135

210

115

282

175

70

247

20.0

70

88

SI70ES

SA70ES

70

105

77

49

1.0

M56×4.0

43.0

160

235

125

318

200

80

283

20.0

80

98

SI80ES

SA80ES

80

120

88

55

1.0

M64×4.0

48.0

180

270

140

365

230

85

325

25.0

95

110

 

 SA5E NHS5 NOS5 KR13 NUKR35X DC2222G  
SA6E NHS6 NOS6 KR16 NUKR40X DC2776  
SA8E NHS8 NOS8 KR19 NUKR47X DC3034  
SA10E NHS10 NOS10 KR22 NUKR52X DC3175(3C)  
SA12E NHS12 NOS12 KR26 NUKR62X DC4445A  
SA15ES NHS14 NOS14 KR30 NUKR62XA DC4972(4C)  
SA17ES NHS16 NOS16 KR32 PUKR62 DC5476A(4C)  
SA20ES NHS18 NOS18 KR35 NUKR72X DC5476B(4C)  
SA25ES NHS20 NOS20 KR40 NUKR80X DC5476C(4C)  
SA30ES NHS22 NOS22 KR47 NUKR86KX DC5776A  
SA35ES NHS25 NOS25 KR52 NUKR90X DC6334B  
SA40ES NHS28 NOS28 KR62 NUKR100X DC7221(5C)  
SA45ES NHS30 NOS30 KR72 NUKR120X DC72221B  
SA50ES   KR80 NUKR140X DC7221B(5C)  
SA60ES   KR85 NUKR150X DC7969C(5C)  
SA70ES   KR90 NUKR160X DC8334C  
SA80ES    NUKR170X DC8729A  
    NUKR180X DC10323A(3C)  
     DC12334C  
     DC12388C(11C)  

Packaging & Shipping

 

Company Profile

 

 

Our Advantages

Our Advantages:
1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain. 

SAMPLES
1. Samples quantity: 1-10 PCS are available. 
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to
    pay samples charge and shipping cost. 
3. It’s better to start your order with Trade Assurance to get full protection for your samples order. 

CUSTOMIZED
The customized LOGO or drawing is acceptable for us. 

MOQ
1. MOQ: 10 PCS standard bearings. 
2. MOQ: 1000 PCS customized your brand bearings. 

OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield. 
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.
 

FAQ

1.What is the minimum order quantity for this product?
    Can be negotiated, we will try our best to meet customer needs.Our company is mainly based on wholesale sales,
    most customers’orders are more than 1 ton.
2.What is your latest delivery time?
    Most orders will be shipped within 7-15 days of payment being received.
3.Does your company have quality assurance?
    Yes, for 1 years.
4.What is the competitiveness of your company’s products compared to other companies?
    High precision, high speed, low noise.
5.What are the advantages of your company’s services compared to other companies?
    Answer questions online 24 hours a day, reply in a timely manner, and provide various documents required by
    customers for customs clearance or sales. 100% after-sales service.
6.Which payment method does your company support?
    Do our best to meet customer needs, negotiable.
7.How to contact us quickly?
    Please send us an inquiry or message and leave your other contact information, such as phone number,
     account or account, we will contact you as soon as possible and provide the detailed information you need.
       Please feel free to contact us, if you have any other question

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Product Name: Spherical Plain Bearing
Package: Neutral Packing Bearing
Sliding Contact: Steel-on-Steel
Features: High Precision, Long Life, Low Noise
Service: OEM ODM
Transport Package: Carton Pallet
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

rod end bearing

Role of Seals and Boots in Protecting Rod End Bearings

Seals and boots serve a crucial role in safeguarding rod end bearings from contaminants and moisture in various applications. Here’s an overview of their functions:

Contaminant Protection:

Rod end bearings are often exposed to harsh environments, including dust, dirt, debris, and other contaminants. Seals and boots create a protective barrier around the bearing’s moving parts, preventing these contaminants from entering the bearing’s internal components.

By effectively sealing off the bearing, they help maintain the integrity of the lubricant and prevent abrasive particles from causing premature wear or damage to the bearing surfaces. This is especially important in applications where cleanliness and reliability are critical, such as aerospace, automotive, industrial machinery, and more.

Moisture Resistance:

In applications where exposure to moisture is a concern, seals and boots act as a defense against water, humidity, and other liquid contaminants. This is vital for preventing corrosion and maintaining the performance of the rod end bearing over time.

Seals and boots are often made from materials that are resistant to moisture, enhancing their protective capabilities. They create a barrier that keeps water away from sensitive bearing components, such as rolling elements and raceways.

Increased Lifespan:

By preventing contaminants and moisture from infiltrating the bearing, seals and boots extend the lifespan of the rod end bearing. They contribute to the overall durability and reliability of the bearing in various applications, ultimately reducing maintenance requirements and replacement intervals.

It’s important to select the right type of seal or boot for a specific application, taking into account factors such as the level of contamination, exposure to moisture, operating conditions, and temperature range. Proper maintenance and periodic inspection of seals and boots are also essential to ensure continued protection and optimal bearing performance.

rod end bearing

Signs of Wear or Damage in Rod End Bearings and Replacement Guidelines

Rod end bearings are critical components in various mechanical systems, and it’s essential to monitor them for signs of wear or damage. Here are common indicators and guidelines for replacement:

1. Excessive Play or Looseness: If you notice excessive play or looseness in the rod end bearing, it’s a clear sign of wear. This can result in imprecise control and reduced system performance, so replacement is recommended.

2. Unusual Noises: Unusual noises such as knocking, clicking, or squeaking during movement are often indicative of rod end bearing issues. These noises can be a result of worn bearing surfaces or damaged components. Address the problem promptly to prevent further damage.

3. Corrosion or Rust: Exposure to moisture or harsh environmental conditions can lead to corrosion and rust on rod end bearings. Corroded bearings may not move smoothly, impacting system operation. If you observe significant corrosion, consider replacement.

4. Visible Damage: Any visible damage, such as cracks, dents, or deformation of the bearing’s body or components, should be taken seriously. Damaged rod end bearings can fail unexpectedly, leading to safety risks and system malfunctions. Replace them if damage is detected.

5. Reduced Range of Motion: If the rod end bearing restricts the range of motion or does not articulate smoothly, it may be worn or damaged. This can affect the performance of the associated system. Replacement is advisable to restore proper functionality.

6. Increased Friction: A sudden increase in friction during movement can indicate a lack of lubrication, contamination, or damage to the bearing surfaces. Re-greasing and cleaning may help, but if the issue persists, consider replacing the bearing.

7. Maintenance Intervals: Depending on the application, rod end bearings may have recommended maintenance intervals. Follow these guidelines and inspect the bearings during routine maintenance. If wear or damage is detected, replace them as necessary.

8. Safety Concerns: In safety-critical applications, it’s vital to prioritize bearing replacement at the first sign of wear or damage. Failure to do so can result in accidents or system failures with serious consequences.

Regular inspection and maintenance of rod end bearings are essential to ensure the continued reliability and performance of mechanical systems. When any of the above signs are observed, it’s advisable to replace the bearings promptly to prevent further issues and potential safety risks.

rod end bearing

Scenarios Requiring Articulation and Pivoting with Rod End Bearings

Rod end bearings are essential components in scenarios where articulation and pivoting are crucial. Here are some examples:

  • Vehicle Suspension: Rod end bearings in a vehicle’s suspension system allow articulation of the wheels, ensuring a smooth and controlled ride, especially on uneven terrain.
  • Aircraft Control Surfaces: In aviation, rod end bearings enable the pivoting of control surfaces like ailerons, elevators, and rudders, providing precise control over an aircraft’s movements.
  • Robotic Arms: Rod end bearings facilitate the articulation and pivoting of robotic arms in manufacturing, assembly, and medical robotics, allowing for precise and flexible movement.
  • Construction Equipment: Heavy machinery such as excavators and cranes rely on rod end bearings for articulation in booms, buckets, and other moving parts for effective operation.
  • Marine Steering Systems: Rod end bearings play a vital role in boat steering systems, allowing articulation of the outboard motor or inboard-outboard drive unit.
  • Agricultural Machinery: Tractors and combines use rod end bearings to articulate and pivot components in the steering and hydraulic systems for farming operations.
  • Rail and Transportation: In rail systems, rod end bearings help with the articulation of train doors, ensuring safe and efficient passenger entry and exit.
  • Conveyor Systems: In material handling, rod end bearings assist in the pivoting and articulation of conveyor belt rollers and other components for the smooth movement of goods.
  • Sports Equipment: Fitness machines like elliptical trainers use rod end bearings to facilitate articulation in pedal arms, allowing users to exercise effectively.

These examples demonstrate the versatility and importance of rod end bearings in various industries where articulation and pivoting are essential for optimal performance and control.

China manufacturer GB/T9161 Standard Corrosion Resistance Wear Resistance High Quality Rod End Bearing Ge160es for Automotive Shock Absorbers   connecting rod bearingChina manufacturer GB/T9161 Standard Corrosion Resistance Wear Resistance High Quality Rod End Bearing Ge160es for Automotive Shock Absorbers   connecting rod bearing
editor by CX 2024-05-10